When the clock runs out of light, it can get unpleasant. So you have to change the display bulb of the Opel Rekord Caravan. Even if the dashboard remains operational, certain indications are missing in order to circulate in good conditions. This manipulation is not difficult to execute, but requires a minimum of meticulousness. We also advise you to take photos at certain stages in order to remind you of the opposite approach, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's look at how to change this bulb, step by step.
How to change the bulb on the display of the Opel Rekord Caravan
Depending on the release dates, the method may vary a little. It is likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you will need disconnect connectors connected to the clock bulb of this Opel Rekord Caravan. You will therefore be able to dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension as well, of course.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered specific concerns.