When the clock stops lighting up, it can be annoying. So we will have to change the display bulb of this Renault Clio 3 Rs. Although the dashboard remains functional, some information is missing in order to drive comfortably. This action is not difficult to perform, but requires a minimum of rigor. We advise you to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To accomplish this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.change-bulb-clock-Renault-Clio-3-Rs

How to change the bulb on the Renault Clio 3 Rs display

Depending on the years of circulation, the methodology may vary slightly. It is conceivable that several covers or screws differ. So that's the general approach to follow.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of the Renault Clio 3 Rs. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the defective bulb. Gently dismantle the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also of course.
  • Place the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered particular concerns.