When the clock runs out of light, it can be annoying. So you have to change the display bulb of this Renault Dezir. Although the dashboard remains operational, we lack some information to drive in good conditions. This manipulation is not complex to carry out, but requires a minimum of meticulousness. We advise you to take photos at certain stages to remember the reverse manipulation, especially concerning the connectors. To complete this task, count about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Renault Dezir display
Depending on the release dates, the procedure may vary slightly. Several covers or screws may not be identical. We therefore suggest the logic to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
- Once the facade is completely dismantled, disconnect connectors connected to the Renault Dezir clock bulb. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage as well of course.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular malfunctions.