When the clock stops working, it can get unpleasant. So you have to change the display bulb of the Renault Egeus. Although the dashboard is still operational, some indications are missing in order to circulate in sufficient comfort. This manipulation is not difficult to perform, but requires a minimum of thoroughness. It is also advisable to take photos at different stages in order to remember the reverse process, especially for connectors. To complete this task, count about a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.
How to change the bulb on the Renault Egeus display
Depending on the years of circulation, the methodology may vary a little. It is possible that several covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors connected to the Renault Egeus clock bulb. You can thus remove all of the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage as well obviously.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave a comment if you have encountered particular problems.