When the clock runs out of light, it can be unpleasant. So you have to change the display bulb of the Renault Ellypse. Although the dashboard remains operational, certain information is missing in order to circulate comfortably. This operation is not difficult to carry out, but requires a minimum of rigor. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially regarding the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Renault-Ellypse

How to change the bulb on the Renault Ellypse display

Depending on the years of circulation, the methodology may vary slightly. It remains possible that several covers or screws are not identical. This is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them preciously aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Renault Ellypse. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also of course.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific problems.