When the clock stops working, it can be unpleasant. So you have to change the display bulb Renault Espace 5. Even if the dashboard remains operational, certain indications are missing in order to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remember the reverse process, especially for the connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb, step by step.change-bulb-clock-Renault-Espace-5

How to change the light bulb on the Renault Espace 5 display

Depending on the years of production, the procedure may vary a little. It is conceivable that some covers or screws differ. This is therefore the process to be followed in general.

  • Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Renault Espace 5. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
  • Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave us a comment if you have encountered specific malfunctions.