When the clock doesn't light up, it can be a hassle. It will therefore be necessary to replace the display bulb of the Renault Espace. Although the dashboard is still functional, several pieces of information are missing in order to circulate in good conditions. This manipulation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages in order to remind you of the reverse manipulation, especially concerning the connectors. To perform this manipulation, allow approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to replace this bulb step by step.change-bulb-clock-Renault-Espace

How to change the Renault Espace display bulb

Depending on the production dates, the procedure may vary a little. It is conceivable that a few covers or screws differ. This is therefore the general approach to be followed.

  • Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this situation, keep them carefully aside.
  • Once the facade is completely dismantled, you must disconnect connectors which connect to the clock bulb of your Renault Espace. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
  • Normally you can access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered particular concerns.