When the clock runs out of light, it can get annoying. So we will have to change the display bulb of the Renault Fregate. Even if the dashboard remains operational, we are missing some indications to drive comfortably. This operation is not difficult to carry out, but requires a minimum of rigor. We also advise you to take photos at certain stages to remember the reverse process, especially for connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Renault Fregate display
Depending on the release dates, the methodology may vary a little. It is possible that several covers or screws are not identical. We therefore offer you the logic to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Renault Fregate. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself with your camera if it helps you.
- Normally you can access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
Please do not hesitate to leave us a comment if you have encountered specific concerns.