When the clock doesn't light up, it can be a hassle. It will therefore be necessary to replace the display bulb of this Renault Frendzy. Although the dashboard is still functional, we are missing several information to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remember the reverse process, especially for the connectors. To carry out this manipulation, count approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Renault-Frendzy

How to change the Renault Frendzy display bulb

Depending on the years of circulation, the methodology may vary a little. It is possible that some covers or screws differ. Here is the logic to follow in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
  • Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of your Renault Frendzy. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
  • Place the new bulb by checking that it is located at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave a comment if you have encountered any particular concerns.