When the clock stops working, it can be annoying. It will therefore have to change the display bulb of this Renault Grand Espace 3. Even if the dashboard is still operational, we lack several information to circulate comfortably. This manipulation is not complex to perform, but requires a minimum of rigor. It is advisable to take pictures at different stages to remember the reverse process, especially for the connectors. To perform this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Renault-Grand-Espace-3

How to change the bulb on the Renault Grand Espace 3 display

Depending on the release dates, the method may vary slightly. It remains likely that some covers or screws differ. This is therefore the process to be followed in general.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of this Renault Grand Espace 3. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

We invite you to leave a comment if you have encountered specific concerns.