When the clock has run out of light, it can get unpleasant. We will therefore have to replace the display bulb of this Renault Grand Kangoo. Although the dashboard is still operational, we are missing several pieces of information in order to drive in sufficient comfort. This operation is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take pictures at certain stages in order to remember the reverse manipulation, in particular for the connectors. To carry out this manipulation, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.change-bulb-clock-Renault-Grand-Kangoo

How to change the display bulb of the Renault Grand Kangoo

Depending on the year of circulation, the method may vary slightly. It remains likely that some covers or screws differ. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Renault Grand Kangoo. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself by taking pictures if needed.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This must be identical in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave a comment if you have encountered specific malfunctions.