When the clock stops lighting up, it can get annoying. So we will have to change the display bulb of the Renault Grand Scenic 2. Although the instrument panel is still operational, some indications are missing for driving in good conditions. This operation is not difficult to perform, but requires a minimum of rigor. We also advise you to take pictures at different stages to remember the reverse process, especially for the connectors. To perform this manipulation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Renault Grand Scenic 2 display
Depending on the release dates, the methodology may vary a little. Several covers or screws may not be the same. We therefore offer you the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove some screws. Therefore, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Renault Grand Scenic 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
- Normally you can access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also obviously.
- Place the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered specific malfunctions.