When the clock stops working, it can be annoying. We will therefore have to replace the display bulb Renault Grand Scenic 3. Even if the dashboard remains functional, we are missing some information in order to drive in good conditions. This manipulation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages in order to remind you of the reverse process, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Renault-Grand-Scenic-3

How to change the bulb on the Renault Grand Scenic 3 display

Depending on the years of production, the procedure may vary slightly. It is possible that several covers or screws differ. We therefore offer you the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of the Renault Grand Scenic 3. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered any particular concerns.