When the clock stops working, it can get annoying. So you have to replace the display bulb of this Renault Grand Scenic 4. Although the dashboard is still operational, we are missing several pieces of information in order to drive in sufficient comfort. This action is not hard to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages in order to remember the reverse process, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.
How to change the bulb on the Renault Grand Scenic 4 display
Depending on the years of circulation, the method may vary a little. It is likely that some covers or screws are not identical. So that's the general approach.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. Therefore, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of this Renault Grand Scenic 4. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if needed.
- You can normally access the broken bulb. Gently dismantle the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well, of course.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered specific problems.