When the clock stops working, it can be a hassle. It will therefore be necessary to change the display bulb of this Renault Juvaquatre. Even if the dashboard remains operational, we are missing several pieces of information to drive in good conditions. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages to remind yourself of the reverse process, especially concerning the connectors. To complete this task, count roughly a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's see how to replace this bulb, point by point.
How to change the display bulb of the Renault Juvaquatre
Depending on the release dates, the method may vary a little. It remains conceivable that some covers or screws are not identical. So that's the logic to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, it will disconnect connectors which connect to the clock bulb of your Renault Juvaquatre. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- You can normally access the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also naturally.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
You can leave us a comment if you have encountered any particular problems.