When the clock has no more light, it can be annoying. So you have to change the display bulb of this Renault Kadjar. Although the dashboard remains operational, we lack certain information to drive in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages to remind you of the reverse process, especially regarding connectors. To perform this task, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-Renault-Kadjar

How to change the bulb on the Renault Kadjar display

Depending on the year of discharge, the procedure may vary slightly. It is likely that several covers or screws are not identical. Here is therefore the procedure to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
  • Once the facade is completely dismantled, you need disconnect connectors which connect to the clock bulb of your Renault Kadjar. You can therefore dismantle all of the block's connectors, provided that you remember the location. Help yourself with your camera if it helps you.
  • You can normally have access to the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also naturally.
  • Place the new bulb making sure it sits well at the bottom of its socket.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave us a comment if you have encountered specific problems.