When the clock doesn't light up anymore, it can be annoying. So you have to replace the display bulb of the Renault Kangoo 2 Express. Even if the dashboard remains operational, it lacks several indications in order to drive in good conditions. This operation is not complex to execute, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages in order to remind you of the reverse approach, in particular concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Renault Kangoo 2 Express display
Depending on the year of release, the methodology may vary a little. It is still possible that several covers or screws differ. So here is the logic to follow in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, you must disconnect connectors which connect to the clock bulb of your Renault Kangoo 2 Express. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
We invite you to leave a comment if you have encountered specific malfunctions.