When the clock doesn't light up any more, it can be annoying. So we will have to change the display bulb Renault Kangoo 2. Even if the dashboard remains operational, some information is missing in order to circulate in good conditions. This action is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remind you of the reverse process, especially for the connectors. To carry out this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to replace this bulb, point by point.
How to change the display bulb of the Renault Kangoo 2
Depending on the production dates, the procedure may vary slightly. It is conceivable that some covers or screws differ. So here is the logic to follow in general.
- Start with remove the covers of the front panel which hinder access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Renault Kangoo 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if that can be helpful.
- Normally you can access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also naturally.
- Place the new bulb making sure it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered specific malfunctions.