When the clock runs out of light, it can be annoying. It will therefore be necessary to replace the display bulb of this Renault Kangoo Rx-4. Although the dashboard is still functional, we are missing several indications in order to drive comfortably. This manipulation is not difficult to execute, but requires a minimum of thoroughness. We also advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To do this, count roughly a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, point by point.
How to change the bulb on the Renault Kangoo Rx-4 display
Depending on the release dates, the method may vary slightly. It is likely that several covers or screws are not identical. Here is therefore the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of your Renault Kangoo Rx-4. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered particular malfunctions.