When the clock stops working, it can get annoying. So you have to change the display bulb of this Renault Kangoo. Although the dashboard remains functional, it lacks some indications to circulate comfortably. This manipulation is not difficult to achieve, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remember the reverse process, especially regarding connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers should suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the Renault Kangoo display
Depending on the release dates, the procedure may vary a little. It is still possible that several covers or screws differ. Here is therefore the procedure to follow in general.
- Start by remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors connected to the clock bulb of this Renault Kangoo. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave us a comment if you have encountered specific problems.