When the clock stops working, it can get annoying. So you have to change the display bulb of this Seat 127. Although the dashboard remains functional, we are missing some information in order to drive in good conditions. This operation is not hard to perform, but requires a minimum of thoroughness. It is advisable to take pictures at different stages in order to remember the reverse manipulation, especially concerning the connectors. To complete this task, plan approximately a small half-hour . For tools, a set of screwdrivers should suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Seat 127 display
Depending on the years of circulation, the method may vary slightly. It is possible that several covers or screws are not identical. We therefore offer you the logic to follow in general.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. Therefore, keep them carefully aside.
- Once the facade is completely dismantled, disconnect connectors which connect to the clock bulb of this Seat 127. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- You can normally access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage also naturally.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Please do not hesitate to leave us a comment if you have encountered specific concerns.