When the clock has no more light, it can become annoying. So you have to replace the display bulb of the Seat 128. Although the dashboard is still functional, we lack some indications in order to drive in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.
How to change the bulb on the Seat 128 display
Depending on the years of circulation, the procedure may vary slightly. It is possible that some covers or screws differ. Here is the process to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
- Once the facade is completely dismantled, you must disconnect connectors connected to the clock bulb of your Seat 128. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The voltage also naturally.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific problems.