When the clock runs out of light, it can be annoying. So you have to replace the display bulb Seat 132. Even if the dashboard remains functional, we lack certain information in order to circulate in sufficient comfort. This operation is not difficult to execute, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse process, especially regarding connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's see how to change this bulb, point by point.
How to change the bulb on the Seat 132 display
Depending on the years of production, the methodology may vary slightly. It is likely that some covers or screws are not identical. So that's the logic to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to remove several screws. Therefore, keep them preciously aside.
- Once the facade is completely removed, you need disconnect connectors which connect to the clock bulb of this Seat 132. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb by checking that it is located at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered specific malfunctions.