When the clock doesn't light up anymore, it can be annoying. So you have to replace the display bulb Seat 133. Although the dashboard remains operational, some information is missing in order to circulate in good conditions. This manipulation is not complex to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remind you of the reverse manipulation, especially concerning connectors. To carry out this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers is enough. Now let's take a look at how to replace this bulb step by step.
How to change the bulb on the Seat 133 display
Depending on the year of circulation, the procedure may vary a little. It is conceivable that several covers or screws are not identical. So here is the logic to follow in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of your Seat 133. You can therefore remove all of the block's connectors, provided you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This must be identical in terms of base and volume. The voltage also obviously.
- Place the new bulb making sure it is at the bottom of its location.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered particular concerns.