When the clock stops working, it can be annoying. So you have to change the display bulb Seat 850. Even if the dashboard remains functional, we are missing some indications in order to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this manipulation, plan about a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the Seat 850 display
Depending on the year of circulation, the procedure may vary a little. It remains conceivable that several covers or screws are not identical. Here is therefore the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of this Seat 850. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- You can normally access the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension as well, of course.
- Place the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific concerns.