When the clock runs out of light, it can be annoying. So we will have to change the display bulb from the seat alhambra. Even if the dashboard is still operational, some indications are missing in order to circulate in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. We also advise you to take photos at certain stages in order to remind you of the opposite approach, particularly concerning connectors. To carry out this operation, plan about a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb, step by step.
How to change the bulb in the seat alhambra display
Depending on the release dates, the methodology may vary slightly. It is likely that several covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. Sometimes you have to remove a few screws. In this situation, keep them preciously aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the seat alhambra. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This must be identical in terms of base and volume. The tension also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave a comment if you have encountered particular problems.