When the clock has no more light, it can be annoying. So you have to replace the display bulb of the Seat Arona. Although the dashboard remains functional, it lacks several information to drive in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages to remember the reverse process, especially for connectors. To carry out this manipulation, count approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's look at how to change this bulb, point by point.
How to change the bulb on the Seat Arona display
Depending on the years of production, the procedure may vary slightly. It is likely that some covers or screws differ. So here is the logic to follow in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Seat Arona. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
- Normally you can have access to the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also obviously.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered specific concerns.