When the clock stops working, it can be annoying. So we will have to change the display bulb of this seat cordoba. Even if the dashboard is still functional, it lacks several information in order to circulate in sufficient comfort. This manipulation is not hard to perform, but requires a minimum of rigor. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially for connectors. To perform this operation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the seat cordoba display
Depending on the release dates, the methodology may vary slightly. It is conceivable that some covers or screws differ. Here is the general procedure to follow.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. Therefore, keep them carefully aside.
- Once the facade is completely removed, you must disconnect connectors connected to the clock bulb of this seat cordoba. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can have access to the broken bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The voltage as well of course.
- Put in the new bulb by checking that it is at the bottom of its location.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave a comment if you have encountered particular malfunctions.