When the clock stops working, it can be unpleasant. It will therefore have to change the display bulb from the seat exeo. Even if the dashboard is still operational, there are some indications missing to circulate comfortably. This operation is not complex to perform, but requires a minimum of thoroughness. We also advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding the connectors. To carry out this manipulation, plan approximately a small half-hour . For tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb step by step.
How to change the bulb of the seat exeo display
Depending on the release dates, the method may vary a little. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
- Once the cover is completely removed, you need disconnect connectors which connect to the seat exeo clock bulb. You can therefore dismantle all the block connectors, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally access the damaged bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it sits well at the bottom of its socket.
- Replace the connectors as they were.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular malfunctions.