When the clock has no more light, it can become annoying. So you have to change the display bulb of the Seat Fura. Although the dashboard remains operational, we lack several information to drive in good conditions. This operation is not complex to execute, but requires a minimum of thoroughness. It is also advisable to take photos at certain stages to remind you of the reverse process, especially for connectors. To perform this task, count approximately a small half-hour . For tools, a set of screwdrivers is sufficient. Now let's see how to change this bulb, step by step.change-bulb-clock-Seat-Fura

How to change the bulb on the Seat Fura display

Depending on the release dates, the procedure may vary slightly. It is possible that some covers or screws are not identical. This is therefore the procedure to be followed in general.

  • Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade is completely removed, you must disconnect connectors which connect to the clock bulb of this Seat Fura. You can therefore remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also naturally.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

Do not hesitate to leave us a comment if you have encountered specific malfunctions.