When the clock doesn't light up any more, it can be annoying. So you have to replace the display bulb from the seat ibiza. Even if the dashboard remains operational, some information is missing in order to circulate comfortably. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To execute this manipulation, count approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's take a look at how to change this bulb step by step.
How to change the bulb on the seat ibiza display
Depending on the release dates, the methodology may vary a little. It is conceivable that some covers or screws differ. We therefore suggest the logic to be followed in general.
- Start by remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade has been completely dismantled, disconnect connectors which connect to the clock bulb of this seat ibiza. This will allow you to remove all of the connectors from the block, as long as you remember the location. Help yourself with your camera if it helps you.
- You can normally access the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well obviously.
- Place the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
Do not hesitate to leave a comment if you have encountered particular problems.