When the clock doesn't light up anymore, it can be annoying. So you have to change the display bulb of this seat marbella. Even if the dashboard remains functional, we are missing some indications to circulate in sufficient comfort. This action is not difficult to execute, but requires a minimum of rigor. It is also advisable to take photos at certain stages to remember the reverse process, especially for connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to replace this bulb, step by step.change-bulb-clock-seat-marbella

How to change the bulb on the seat marbella display

Depending on the years of production, the methodology may vary slightly. It is still possible that several covers or screws differ. We therefore offer you the logic to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to take off some screws. In this situation, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the seat marbella. You will be able to remove all the connectors from the block, as long as you remember the location. Help yourself by taking photos if necessary.
  • Normally you can access the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave us a comment if you have encountered any particular concerns.