When the clock stops lighting up, it can be annoying. We will therefore have to replace the display bulb of this Seat Mii. Even if the dashboard is still functional, we lack some information to drive in sufficient comfort. This action is not difficult to perform, but requires a minimum of thoroughness. It is indeed advisable to take photos at certain stages to remember the reverse manipulation, especially for connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, step by step.
How to change the bulb on the Seat Mii display
Depending on the production dates, the methodology may vary a little. It is conceivable that some covers or screws differ. Here is the logic to follow in general.
- Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this situation, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of the Seat Mii. You will therefore be able to dismantle all of the block's connectors, provided that you remember the location. Help yourself by taking photos if it can be useful to you.
- Normally you can access the defective bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The voltage also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered particular malfunctions.