When the clock stops lighting up, it can get annoying. So you have to replace the display bulb Smart For-us. Although the dashboard is still functional, some information is missing to drive comfortably. This operation is not complex to perform, but requires a minimum of rigor. It is also advisable to take photos at different stages to remind you of the reverse manipulation, especially for connectors. To carry out this operation, plan about a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's take a look at how to replace this bulb, step by step.change-bulb-clock-Smart-For-us

How to change the bulb of the Smart For-us display

Depending on the production dates, the methodology may vary a little. It is likely that several covers or screws differ. We therefore suggest the logic to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
  • Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of your Smart For-us. You will be able to dismantle all of the block's connectors, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • You can normally have access to the broken bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The voltage also naturally.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave a comment if you have encountered specific malfunctions.