When the clock runs out of light, it can be annoying. So we will have to change the display bulb of this Smart Fortwo 3. Even if the dashboard is still functional, we lack several information to circulate in sufficient comfort. This operation is not hard to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remember the reverse process, especially for the connectors. To complete this task, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's look at how to change this bulb, point by point.change-bulb-clock-Smart-Fortwo-3

How to change the display bulb of the Smart Fortwo 3

Depending on the years of circulation, the procedure may vary a little. It remains conceivable that some covers or screws are not identical. We therefore offer you the logic to follow in general.

  • Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. Therefore, keep them carefully aside.
  • Once the facade has been completely removed, it will disconnect connectors that connect to the clock bulb of the Smart Fortwo 3. You will be able to remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if that can help.
  • You can normally access the damaged bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension too of course.
  • Put in the new bulb making sure it is at the bottom of its socket.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

Do not hesitate to leave a comment if you have encountered specific problems.