When the clock has no more light, it can be annoying. So you have to replace the display bulb of this smart roadster. Even if the dashboard remains functional, it lacks several information in order to drive in good conditions. This action is not hard to perform, but requires a minimum of rigor. It is also advisable to take pictures at certain stages in order to remember the reverse manipulation, especially concerning the connectors. To perform this manipulation, count approximately a small half-hour . Regarding tools, a pair of screwdrivers is sufficient. Now let's take a look at how to replace this bulb, point by point.
How to change the smart roadster display bulb
Depending on the release dates, the methodology may vary slightly. It remains likely that several covers or screws are not identical. This is the general process to follow.
- Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. In this case, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors that connect to the clock bulb of the smart roadster. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
- You can normally have access to the damaged bulb. Carefully remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension also of course.
- Place the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
You can leave us a comment if you have encountered particular malfunctions.