When the clock stops working, it can be annoying. So you have to change the display bulb of this smart smart. Even if the dashboard remains operational, we are missing several indications to drive in sufficient comfort. This operation is not complex to perform, but requires a minimum of thoroughness. It is also advisable to take photos at different stages to remind you of the reverse process, especially regarding connectors. To accomplish this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, step by step.change-bulb-clock-smart-smart

How to change the bulb on the smart smart display

Depending on the release dates, the method may vary a little. It is likely that several covers or screws are not identical. Here is therefore the procedure to follow in general.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove a few screws. In this case, keep them carefully aside.
  • Once the facade is completely dismantled, you must disconnect connectors that connect to the clock bulb of the smart smart. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
  • You can normally access the broken bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave us a comment if you have encountered any particular concerns.