When the clock stops working, it can get annoying. So you have to change the display bulb of this Suzuki Alto 2. Even if the dashboard is still operational, we lack some indications in order to circulate comfortably. This action is not complex to perform, but requires a minimum of thoroughness. We advise you to take pictures at certain stages in order to remind you of the reverse manipulation, in particular concerning the connectors. To carry out this operation, plan approximately a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.
How to change the display bulb of the Suzuki Alto 2
Depending on the years of circulation, the method may vary a little. It remains conceivable that several covers or screws differ. Here is the logic to follow in general.
- Start by remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the facade is completely removed, you need disconnect connectors connected to the clock bulb of the Suzuki Alto 2. You can thus remove all the connectors from the unit, provided you remember the location. Help yourself by taking pictures if needed.
- Normally you can access the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be identical in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
You can leave us a comment if you have encountered specific problems.