When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of this Suzuki Alto. Even if the dashboard remains functional, it lacks several indications to circulate in good conditions. This manipulation is not hard to perform, but requires a minimum of rigor. It is indeed advisable to take photos at certain stages to remind you of the reverse manipulation, especially for connectors. To perform this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, step by step.change-bulb-clock-Suzuki-Alto

How to change the bulb on the Suzuki Alto display

Depending on the years of circulation, the methodology may vary a little. It remains conceivable that several covers or screws are not identical. This is the logic to follow in general.

  • Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove some screws. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors connected to the clock bulb of this Suzuki Alto. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can access the defective bulb. Carefully disassemble the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension as well, of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors as they were.
  • Replace all of the front covers.

We invite you to leave a comment if you have encountered particular problems.