When the clock stops working, it can get annoying. So you have to change the display bulb of this Suzuki Baleno. Although the dashboard remains operational, it lacks some information to drive comfortably. This operation is not difficult to perform, but requires a minimum of thoroughness. We advise you to take pictures at different stages to remember the reverse manipulation, especially concerning the connectors. To perform this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the display bulb of the Suzuki Baleno
Depending on the release years, the method may vary a little. Several covers or screws may differ. Here is the logic to follow in general.
- Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors that connect to the clock bulb of your Suzuki Baleno. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself with your camera if that can help.
- You can normally have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also naturally.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
You can leave a comment if you have encountered particular problems.