When the clock stops working, it can get annoying. It will therefore have to change the display bulb of the Suzuki Carry. Although the dashboard is still operational, there are certain indications missing to circulate in good conditions. This action is not difficult to carry out, but requires a minimum of rigor. We also advise you to take photos at certain stages to remind you of the reverse process, especially regarding connectors. To carry out this manipulation, plan about a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's take a look at how to change this bulb, step by step.
How to change the bulb on the Suzuki Carry display
Depending on the release dates, the procedure may vary slightly. It is likely that several covers or screws are not identical. Here is therefore the logic to be followed in general.
- Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, you must disconnect connectors that connect to the clock bulb of your Suzuki Carry. You can thus disassemble all the connectors of the block, provided you remember the location. Help yourself by taking photos if necessary.
- You can normally access the damaged bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also obviously.
- Put in the new bulb by checking that it is at the bottom of its location.
- Replace the connectors as they were.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered specific malfunctions.