When the clock stops lighting up, it can be unpleasant. So you have to replace the display bulb of the Suzuki Celerio. Although the dashboard remains operational, we are missing several pieces of information in order to drive comfortably. This manipulation is not complex to execute, but requires a minimum of thoroughness. We advise you to take photos at different stages in order to remember the reverse manipulation, especially for connectors. To carry out this manipulation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.
How to change the bulb on the Suzuki Celerio display
Depending on the release dates, the procedure may vary slightly. It is possible that several covers or screws differ. We therefore offer you the logic to follow in general.
- Start by remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of the Suzuki Celerio. You will therefore be able to dismantle all of the block's connectors, provided that you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the broken bulb. Carefully disassemble the bulb of the clock.
- Compare the new bulb with the old one. This should be similar in terms of base and volume. The tension as well, of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave us a comment if you have encountered specific problems.