When the clock stops working, it can get annoying. So we will have to change the display bulb Suzuki Grand Vitara 2. Although the dashboard is still functional, some information is missing to drive in good conditions. This action is not complex to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages to remind you of the reverse manipulation, in particular concerning the connectors. To carry out this operation, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to change this bulb, point by point.
How to change the display bulb of the Suzuki Grand Vitara 2
Depending on the release dates, the procedure may vary a little. It is conceivable that some covers or screws differ. So that's the logic to follow in general.
- Start with remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. You may have to remove several screws. In this situation, keep them carefully aside.
- Once the facade has been completely removed, disconnect connectors connected to the clock bulb of the Suzuki Grand Vitara 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if necessary.
- You can normally have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension as well, of course.
- Put in the new bulb making sure it is at the bottom of its location.
- Replace the connectors in their location.
- Replace all of the front covers.
We invite you to leave us a comment if you have encountered particular malfunctions.