When the clock stops working, it can be annoying. So we will have to change the display bulb of the Suzuki Grand Vitara Evolution. Even if the dashboard remains operational, some information is missing to drive in good conditions. This action is not difficult to perform, but requires a minimum of thoroughness. We advise you to take photos at different stages to remind you of the reverse manipulation, especially regarding connectors. To perform this task, count approximately a small half-hour . Regarding tools, a pair of screwdrivers should suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Suzuki-Grand-Vitara-Evolution

How to change the bulb on the Suzuki Grand Vitara Evolution display

Depending on the year of release, the methodology may vary slightly. It is likely that some covers or screws differ. We therefore suggest the procedure to be followed in general.

  • Start with remove the covers of the facade which hinder accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them carefully aside.
  • Once the facade is completely dismantled, you need disconnect connectors connected to the clock bulb of the Suzuki Grand Vitara Evolution. You can therefore dismantle all of the block's connectors, provided you remember the location. Help yourself with your camera if needed.
  • Normally you can have access to the damaged bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter should be similar in terms of base and volume. The tension also obviously.
  • Place the new bulb by checking that it is at the bottom of its location.
  • Put the connectors in place as they were.
  • Put all the covers on the front.

You can leave a comment if you have encountered specific problems.