When the clock runs out of light, it can be annoying. So you have to replace the display bulb of the Suzuki Grand Vitara. Even if the dashboard remains operational, there are some indications missing to drive in good conditions. This action is not complex to perform, but requires a minimum of rigor. It is indeed advisable to take photos at different stages to remember the reverse manipulation, especially for connectors. To perform this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's take a look at how to change this bulb, point by point.change-bulb-clock-Suzuki-Grand-Vitara

How to change the bulb on the Suzuki Grand Vitara display

Depending on the release dates, the method may vary a little. It is likely that some covers or screws are not identical. Here is the procedure to follow in general.

  • Start with remove the covers of the front panel which obstruct access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. Therefore, keep them preciously aside.
  • Once the facade has been completely removed, it will disconnect connectors that connect to the clock bulb of your Suzuki Grand Vitara. You can therefore remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
  • You can normally have access to the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the old one. This should be similar in terms of base and volume. The voltage also obviously.
  • Place the new bulb making sure it sits well at the bottom of its socket.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered particular malfunctions.