When the clock stops working, it can be annoying. So you have to change the display bulb Suzuki Ignis 2. Even if the dashboard is still functional, some indications are missing for driving in good conditions. This operation is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at certain stages to remember the reverse process, especially for the connectors. To complete this task, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers will suffice. Now let's see how to change this bulb, point by point.change-bulb-clock-Suzuki-Ignis-2

How to change the display bulb of the Suzuki Ignis 2

Depending on the release dates, the method may vary slightly. It is conceivable that some covers or screws are not identical. Here is the process to follow in general.

  • Start with remove the covers of the front panel which impede access to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove some screws. Therefore, keep them carefully aside.
  • Once the facade has been completely dismantled, disconnect connectors connected to the clock bulb of your Suzuki Ignis 2. You can therefore remove all the connectors from the unit, provided you remember the location. Help yourself with your camera if needed.
  • You can normally have access to the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The voltage also of course.
  • Put in the new bulb by checking that it is at the bottom of its socket.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave a comment if you have encountered specific concerns.