When the clock runs out of light, it can be annoying. So you have to change the display bulb of the Suzuki Jimny. Although the dashboard is still operational, certain information is missing in order to circulate in sufficient comfort. This manipulation is not difficult to execute, but requires a minimum of meticulousness. It is indeed advisable to take photos at certain stages in order to remember the reverse manipulation, in particular concerning the connectors. To carry out this task, plan around a small half-hour . In terms of tools, a set of screwdrivers is enough. Now let's see how to change this bulb, step by step.
How to change the bulb on the Suzuki Jimny display
Depending on the years of production, the procedure may vary slightly. It is likely that some covers or screws are not identical. We therefore suggest the procedure to be followed in general.
- Start with remove the covers of the front panel which prevent access to the display. You can use a flat screwdriver to pry into the grooves. It happens that you have to take off some screws. Therefore, keep them carefully aside.
- Once the facade has been completely dismantled, you must disconnect connectors connected to the clock bulb of your Suzuki Jimny. You can therefore remove all of the connectors from the block, provided you remember the location. Help yourself with your camera if it helps you.
- Normally you can have access to the broken bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter should be similar in terms of base and volume. The tension as well, of course.
- Place the new bulb making sure it is at the bottom of its socket.
- Put the connectors in place.
- Put all the covers on the front.
You can leave a comment if you have encountered specific concerns.