When the clock stops lighting up, it can be unpleasant. It will therefore have to change the display bulb of the Suzuki Kizashi. Even if the dashboard remains functional, it lacks certain information in order to drive in good conditions. This action is not difficult to perform, but requires a minimum of rigor. We advise you to take pictures at different stages in order to remember the reverse manipulation, especially for the connectors. To complete this task, allow about a small half-hour . Regarding tools, a pair of screwdrivers will suffice. Now let's see how to replace this bulb, point by point.change-bulb-clock-Suzuki-Kizashi

How to change the display bulb of the Suzuki Kizashi

Depending on the years of circulation, the method may vary slightly. It is still possible that several covers or screws are not identical. This is the general approach to be followed.

  • Start with remove the covers front panel that prevent access to the display. You can use a flat screwdriver to pry in the grooves. It happens that you have to remove several screws. In this situation, keep them carefully aside.
  • Once the facade is completely removed, you need disconnect connectors that connect to the clock bulb of your Suzuki Kizashi. You can thus remove all the connectors from the block, provided you remember the location. Help yourself with your camera if necessary.
  • Normally you can access the defective bulb. Carefully remove the bulb of the clock.
  • Compare the new bulb with the previous one. This should be similar in terms of base and volume. The tension too of course.
  • Put in the new bulb making sure it is at the bottom of its location.
  • Replace the connectors in their location.
  • Replace all of the front covers.

You can leave us a comment if you have encountered specific malfunctions.