When the clock doesn't light up any more, it can be annoying. So you have to change the display bulb of this Suzuki Liana. Although the dashboard is still operational, certain information is missing in order to circulate in sufficient comfort. This action is not difficult to execute, but requires a minimum of rigor. We advise you to take photos at different stages in order to remember the reverse manipulation, especially concerning the connectors. To carry out this operation, plan approximately a small half-hour . In terms of tools, a pair of screwdrivers should suffice. Now let's look at how to change this bulb, point by point.
How to change the bulb on the Suzuki Liana display
Depending on the years of production, the methodology may vary slightly. It remains likely that some covers or screws are not identical. Here is the procedure to follow in general.
- Start by remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry into the grooves. You may need to remove more than one screw. In this case, keep them preciously aside.
- Once the facade has been completely removed, it will disconnect connectors connected to the clock bulb of this Suzuki Liana. You can thus remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if necessary.
- Normally you can have access to the defective bulb. Gently remove the bulb of the clock.
- Compare the new bulb with the previous one. The latter must be similar in terms of base and volume. The tension also of course.
- Put in the new bulb by checking that it is at the bottom of its socket.
- Put the connectors in place as they were.
- Put all the covers on the front.
Do not hesitate to leave a comment if you have encountered specific concerns.