When the clock stops working, it can be annoying. So you have to replace the display bulb of this Suzuki Swift 2. Although the dashboard is still operational, it lacks some information to circulate in good conditions. This manipulation is not complex to perform, but requires a minimum of rigor. We advise you to take photos at different stages to remember the reverse manipulation, especially for the connectors. To accomplish this task, count approximately a small half-hour . In terms of tools, a set of screwdrivers will suffice. Now let's take a look at how to replace this bulb step by step.change-bulb-clock-Suzuki-Swift-2

How to change the bulb on the Suzuki Swift 2 display

Depending on the release dates, the procedure may vary slightly. Several covers or screws may not be identical. So that's the general approach.

  • Start with remove the covers of the front panel which prevent accessibility to the display. You can use a flat screwdriver to pry in the grooves. You may need to remove more than one screw. In this case, keep them carefully aside.
  • Once the facade has been completely removed, disconnect connectors which connect to the clock bulb of your Suzuki Swift 2. You will be able to remove all the connectors from the block, provided you remember the location. Help yourself by taking photos if it can be useful to you.
  • Normally you can access the broken bulb. Gently remove the bulb of the clock.
  • Compare the new bulb with the old one. The latter must be identical in terms of base and volume. The tension also naturally.
  • Place the new bulb making sure it is at the bottom of its location.
  • Put the connectors in place.
  • Put all the covers on the front.

You can leave a comment if you have encountered specific malfunctions.